Um dein Gen1 Display auf den neusten Stand abzudaten brauchst du den CANchecked Updater für dein entsprechendes Betriebssystem.
| CANcheckedUpdater-win64.zip | CANchecked Updater Windows 64bit (MFD28 / MFD32 / MFD32S) |
| CANcheckedUpdater-win32.zip | CANchecked Updater Windows 32bit (MFD28 / MFD32 / MFD32S) |
| CANcheckedUpdater-osx.zip | CANchecked Updater für Mac OSX |
| driver.zip | Treiber NUR für Windows 7. Windows 10 und 11 benötigen keinen Treiber! |
Bitte schließe die DSS bevor du das Update deines Displays startest!
Bei der Fehlermeldung „Permission denied for device…“ kann es helfen, den PC/Laptop neu zu starten und den Updater als Administrator auszuführen oder das Display von 12V trennen und am PC ab- und wieder anstecken.
Update Dateien
Bevor du mit dem Update starten kannst, musst du dir die passende Firmware für dein Gen1 Display herunterladen. Downloads MFD28 / MFD32 / MFD32S / MFA28 Gen1
Vorgehen zum Updaten
Für das Update wird ein Micro-USB Datenkabel verwendet. Ertönt kein Ton beim Anstecken, so nutzt man wahrscheinlich ein Ladekabel. Bei der Lieferung liegt immer ein passendes Kabel dabei.
Der USB Anschluss am Display ist sehr klein und empfindlich. Hier bitte höchste Sorgfalt walten lassen.
Sobald das Display angesteckt ist, er scheint es im Updater. Danach klickst du auf „Upload“ und wählst die Hex-Datei aus. Das Update startet automatisch. Währenddessen das Display nicht abstecken und das Programm durchlaufen lassen.
Changelog (Gen1)
3.221
- fix: pictures were not loading
3.220
- several bug fixes
3.219
- optimized digital frequency input reading
- lowered SD card speed
- enabled can messages for TP2
- fixed pageswitch with external button
3.218
- fixed 32bit (byte length 4) big endian readings
- fixed LinkECU multistate
3.217
- fixed saving data to SD (widgets/sensors) from DSS and display touch
- changed naming scheme for firmware
- use with DSS 0.019
3.2_16
- fixed OBD2 PIDs supported
- fixed timeout in OBD2 delete DTC
- minor OBD2 optimizations
- fixed analogue sensor readings in main pages – introduced bug with earlier firmware
3.2_15
- UDS compatibility with other external devices using Can broadcast
- OMEX integration finalized
- bugfix VEMS protocol
- optimized DSS timeout settings
- optimized autobaro
3.2_14
- renewed UDS library (use UDS firmware)
- DTC widget for UDS
- ringmeter fully enganged when value=warn
- backlight blend in on start
- small picture gets mapped to real picture (for DSS0.1_6)
- remove TRI error to keep current file name
- bug fix: backlight dim when display is rotated
3.2_13
- fixed BMW exhaust flap control via Cruise Control „Reset“
- fixed motec Multiswitch factor
- change BUZZER time to 250ms
- TP2.0 optimization
- fixed fontsize after RPM widget
- fixed big with lognumber bigger 9
3.2_12
- added more Motec switches (0x6F2) and 2x Multiswitch (0x6F1)
- changed motec switches 0x6F0 to correct format
- shift light by gear (DSS v0.1_6 needed)
- smoother font in Warning popup
- BMW clear DTC fixed
- added BMW DTC widget (type=16)
- added BMW „ECU lock“
- BMW exhaust flap always AUTO on start
- Can Filter for „Preset OBD“ adjusted to BMW protocol
- RPM widget corrected when display rotated
- RPM widget will show change colors (maxrpm-3000=yellow, maxrpm-2000=RED)
- corrected log widget font and touch behaviour when display rotated
- TP2.0 optimization
- with TP2.0 firmware only protocol TP2.0 or OFF is allowed (removed OBD)
3.2_1n
- further BMW F-Series optimisations
- third RPM skin (grey/red)
- fixed bug in SDdbg
- changed buzzer handling – external buzzer attached to B7 (plus ground attached to B9)
- wrong yellow marker with OBD protocol on a analogue sensor
- lock widget screen: change only sensor or color of the widgets – no more messing around possible
- improved TRI error handling, when TRI file not found
3.2_1m
- fixed int8_t readings
- added LinkECU multistate
- optimized display startup due to SD problems
3.2_1k
- change tiretemp (refresh avg optimized)
- fixed multistate switches with DSS
v3.2_1i
- added 2 MultiState Switche (EMUv3, MaxxECU) – Can Switch type (selectable number of states – up to 16) – simulate 0-5000mV range
- fixed false touches when changing widgets with UDS/OBD
- fixed picture search on SD when changing picture widget
- display removes invalid bmp files when cycling through pictures
- fixed backlight switch with inout pin
v3.2_1h
- added turbospeed to EMUv3 protocol (RPM input)
- added format=4 IEEE754 float values (set length=4)
- clean DSS shoutdown => touch usable
- error with OBD2/UDS: when only a picture is visuable, the display dies
- Backlight PWM frequency changed (slightly flickered when dimmed)
- Boost Pin verification
- SafetyDuty correction bug fix
- fixed white screen on startup (rarely seen)
- fixed SD problems
- fixed usage with DSS + UDS/OBD2
v3.2_1g
- EMU EGT stream added
- fixed offset for AIN1+3
v3.2_1f
- fixed display stuck on empty screen when UDS/OBD enabled
- image upload for DSS
- DigOut manual override bugfix
- create missing widget file from DSS
