Das MFD15 Gen2 kann per Browser über die oDSS oder kabelgebunden mit dem CANcheckedMFD15Gen2Updater aktualisiert werden. Bei der kabelgebundenen Variante wird ein Treiber für Windows benötigt.
Update über die oDSS
Bitte lade dir zuerst hier die beiden .bin-Dateien zum updaten deines Displays auf dein Smartphone/Computer. Jetzt kannst du an deinem MFD15 durch langes Drücken der beiden Knöpfe (L+R) bzw. des Drehpotis den WLAN-Hotspot aktivieren und dich mit deinem Smartphone/Computer verbinden.
Name des Hotspot: MFD15
Passwort: 12345678
Anschließend im Browser die Adresse 192.168.4.1 öffnen und zu dem Menüpunkt „Update device“ navigieren. Auf „Upload“ drücken und die erste der zuvor heruntergeladenen .bin-Datei (4.xxx.bin) auswählen. Im Anschluss startet das Update und der Ladebalken läuft durch. Nachdem der Balken durchgeladen ist, muss dein Datendisplay manuell durch Zündungswechsel rebootet werden. Nun kannst du den Hotspot erneut aktivieren und die zweite .bin-Datei (4.xxx_fs.bin) nach dem gleichen Schema hochladen.
Sobald der Ladebalken durchgelaufen ist, kannst du dein Display rebooten und bist fertig.
Update über USB
Bitte lade dir hier die aktuelle.flash-Datei, den CANcheckedMFD15Gen2Updater und den Treiber herunter. Nachdem du den Treiber für Windows installiert hast, kannst du die USB Verbindung zum Display herstellen. Anschließend startest du den Updater, überprüfst ob du einen COM-Port hast, wählst die zuvor heruntergeladene .flash-Datei aus und startest das Update. Der Ladebalken läuft im Updater durch und dein Display rebootet im Anschluss.
Changelog
v4.102
- ADDED: Sentronic Can Switch protocol to reset fuel level sensor (use canswitch 1 – frame gets transmitted only when button is pressed)
- ENHANCED: UDS auto protocol 29/11bit => 4.100g4
v4.101
- ADDED: highlight warning in 2way, 4-way, 6way and bar+2-way
- ADDED: restore config is working
- ENHANCED: Shift light also works when wifi is on
- FIX: DSG infos (oil temp, clutch temp, clutch pressure) tested and work
- FIX: LED/Popup option were not shown correctly in oDSS
- ENHANCED: TP2.0/KWP2000 optimisations for more stable protocol
v4.100i
- FIX: TRI/TRX select process and upload process more stable now
v4.100h
- FIX: optimized unsigned values with masks
- FIX: corrected byte length 4 values
- FIX: Haltech can switching DPI fixed for NSP
- ENHANCED: added new CANswitch (BMS)
v4.100g - ENHANCED: turbo speed test (frequency input on MPP1 up to 65.000 1/s)
v4.100e
- FIX: picture upload overwrites TRI file
- FIX: uninitialized TRI file shows „XXXXX“ in TRI select dialog
v4.100d
- FIX: 1 byte OBD/UDS was not reading correctly from can stream (introduced in 4.100d)
- FIX: 1 byte unsigned was not reading correctly from can stream
v4.100c
- ENHANCED: yaris tire temp/press supported
v4.100b
- FIX: TP2 had connection issues when stiching pages
- FIX: TP2 protocol was still sending messages although OBD/UDS protocol in TRI file detected
- FIX: pre-caching images in oDSS
- ENHANCED: added detailled upload information while updating/uploading
v4.100a
- FIX: UDS TRI files get fixed (internal bug)
- ENHANCED: speed up TRI/TRX upload process
- FIX: LED warning works for lower and upper warnings
v4.001g
- ENHANCED: added SCS delta can switch protocol
- ENHANCED: 29bit UDS protocol
- FIXED: LED warning doesnt get removed, when alarms cleared (v4.001g2)
v4.001f
- ENHANCED: removed empty sensors completely – they do not get loaded and get removed when TRI/TRX changes take place
- ENHANCED: hide multiplier for analogues sensors
v4.001e
- ENHANCED: hide „empty“ sensors
- ENHANCED: show popup while initial page loads on Wifi
- ENHANCED: smoothed out round meter (now only one color possible)
- ENHANCED: TR/TRX upload loads file automatically. User needs to restart the gauge after upload
v4.001d3
- ADDED: EvoX protocol options (use O-EVOX.TRX file)
- ADDED: OBD multiframe
- ADDED: UDS 29bit
- ADDED: Renault/Alpine Can Bus support
- ENHANCED: [ENTER] does not transmit config from oDSS anymore
- ENHANCED: added possibility to query not just ECU in TP2.0 protocol (adjusted TRX needed)
- ENHANCED: automatic fix UDS sensor length
- ENHANCED: scaling in bars (2 horizontal, X vertical) are shown on top of sensor value
- ENHANCED: changed default shift light RPM starting from 5000 incrementing in +500
- FIX: after editing MAP/NTC not all values were transmitted
v4.001d1
- ADDED: J1939 option – hit us up for a solution
- FIX: can switches not transmitted when in can switch overview
4.001d
- ADDED: dim display in buttons and MPP1 can be used to dim the display with +12V
- ADDED: MPP2 output to switch external device on/off (low side up to 3A) – license needed
- ADDED: Peugeot protocol optimizations (oil temp/pressure)
- ADDED: new page styles (xBar => 1-6 bars in one view; Single value => just a single number value)
- ENHANCED: smoother round meter
- ENHANCED: page style selection with popup
- ENHANCED: better understandable error message
- ENHANCED: better page selection dialog in oDSS
- ENHANCED: NTC sensor correction value. When NTC reading is too high, lower the value „NTC correct“ – default is 230. Try 220.
- FIX: shrinked base_fs with less TRI files – get your latest from canchecked.de/help
- FIX: show error „no sensors found“ when wrong TRX encryption detected
- FIX: when changing sensor names in oDSS they get populated in all select forms
4.001c
- FIX: MFD15 reports wrong WiFi password although it is correct
4.001b
- FIX: uptimized Wifi start for more reliable connection
- FIX: TP2 multiplier was added twice
- ADDED: display temperature – which is core temperature of CPU
- ADDED: popup for bin file update, to wait for gauge reboot
- ADDED: default TRI update – added unit conversions and minor fixes
- ADDED: shift light bar on top of screen – you can deactivate bar and/or LED in oDSS
- ADDED: limited decimal places to 5
- ADDED: save config to file in oDSS
- ADDED: Gear 8
4.001a
- ADDED: unit conversion (pressure, speed, temperature, combustion ratio) – TRI/TRX file needs to support this
- ADDED: easter egg
- ADDED: TP2 protocol
- FIX: webserver handling sometimes timed out
- FIX: default TRI select in oDSS even when custom TRI has been uploaded
4.001
- ADDED: Second partition to seperate user settings from base filesystem
4.000
Initial release version
